XLR Cable

Specifications
Connection Type: XLR CABLE
Application: Standard three-pin connector on which pins 1 is typically connected to the shield of the cabling to provide a ground, whereas pins 2 and 3 carry the actual audio signal, normally in a balanced (out-of-phase) configuration. 
 
 
Material:       
Oxygen-Free Copper: Copper that has varying degrees of oxygen removed to increase its pure     
Insulation Polyethylene (PE): Synthetic plastic material used in multiple applications, including electrical cable.
Shield: Bare Annealed Copper Serve Shield (95% Coverage)
PVC: Synthetic plastic material also used for electrical cable insulation.
Gender: Male, Female
Electrical
Capacitance between contacts:  ≤ 4 pF
Contact resistance:  ≤ 3 mΩ
Dielectric strength: 1.5 kVdc
Insulation resistance: > 10 GΩ (initial)
Rated voltage: < 50 V
Mechanical
Cable O.D:  3.5 - 8.0 mm
Insertion force:  ≤ 20 N
Withdrawal force: ≤ 20 N
Lifetime:  > 1000 mating cycles
Wire size: 24 AWG
Wiring: Solder contacts
Locking device:  Latch lock